Lours Philippe
Philippe Lours is Professor at Mines Albi. He conducts research and teaching at the University of Toulouse - Mines Albi since 1995. He is also an invited professor at ISAE - SupAéro (Institut Supérieur de l’Aéronautique et de l’Espace - Supaéro), at the University Paul Sabatier Toulouse, at the University of Transports and Communications Hanoi (Vietnam). He has been lecturing in several universities over the world, including the University of California at Berkeley (1990), Ecole Polytechnique de Montréal (1993), Université Joseph Fourier Grenoble (1998), Toyohashi University of Technology - Japan (2002), Dalian Maritime University - China (2004), Universitatea Dunarea de Jos - Galati Romania (2000-2005), the University of Science & Technology Hanoi - USTH (2013), the Civil Aviation University of China - Tianjin (2013).
Graduated in Materials Science & Engineering at INSA (Institut National des Sciences Appliquées) and in Solid State Physics (1986), Philippe Lours defended his doctoral thesis on the plasticity of single crystal nickel based superalloys investigated by In Situ Transmission Electron Microscopy in 1989. After a postdoctoral fellowhip at the Lawrence Berkeley Lab. (Berkeley, USA) where he further specialised in Transmission Electron Microscopy including High Resolution and High Voltage TEM, he has held several positions of R & D engineer, process engineer and project engineer in the metal alloys industry in Toulouse, France (sputtering targets) and Montreal, Québec-Canada (shape memory alloys).
Full Professor at Mines Albi where he has founded the Master program "Materials for Aeronautics & Space" in 2003, he is now head of the new Master "Advanced Materials & Mechanical Engineering". Author of 50 articles in international journals with peer review and book chapter, Philippe Lours participated to more than 70 national and international conferences. He is former head of the research team PUMMA (Enginering Properties & Microstructure of Advanced Materials) at Institut Clément Ader. Director or co-director of fourteen PhD students, his research focusses on the relationship between the microstructure and the engineering properties of metallic materials and coatings with a particular attention on high temperature materials for aerospace applications (superalloys and thermal barrier coatings). HDR of the National Polytechnic Institute of Toulouse, Philippe Lours is a member of the management team of the PhD School "Aeronautics & Astronautics" and was awarded the rank of "chevalier dans l’ordre des palmes académiques" in 2009.
[ACL1]
L. Pin, V. Vidal, F. Blas, F. Ansart, S. Duluard, J.-P. Bonino, Y. Le Maoult and P. Lours. Optimized sol–gel thermal barrier coatings for long-term cyclic oxidation life. Journal of the European Ceramic Society. (34)961-974. 2014 [DOI]
[ACL2]
L. Pin, C. Pilgrim, J. Feist, Y. Le Maoult, F. Ansart and P. Lours. Characterisation of thermal barrier sensor coatings synthesised by sol-gel route. Sensors and Actuators: A Physical. , . 2013 [DOI]
[ACL3]
L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Reinforced sol gel thermal barrier coatings and their cyclic oxidation life. Journal of the European Ceramic Society. 33(2)269-276. 2013 [DOI]
[ACL4]
A. Duchosal, F. Deschaux-beaume, P. Lours, S. Haro and G. Fras. Analysis of weld-cracking and improvement of the weld-repair process of superplastic forming tools. MATERIALS & DESIGN. 46, 731-739. 2013 [DOI]
[ACL5]
L. Pin, V. Vidal, F. Blas, F. Ansart, S. Duluard, J.-P. Bonino, Y. Le Maoult and P. Lours. Optimised sol-gel thermal barrier coatings for long-term cyclic oxidation life. Journal of the European Ceramic Society. , . 2013 [DOI]
[ACL6]
M. Cusic, F. Abu-farha, P. Lours, Y. Le Maoult, G. Bernhart and M. Kraisheh. Towards superplastic forming of AZ31 magnesium alloy with controlled microstructure. Mat-wiss und Werkstofftech. 43(9)810-816. 2012 [DOI]
[ACL7]
J. Sniezewski, Y. Le Maoult and P. Lours. Buckling and spalling failure of alumina grown by oxidation on ODS FeCrAl alloys. Materials at High Temperature. 28(1)17-20. 2011 [DOI]
[ACL8]
I. Souki, D. Delagnes and P. Lours. Influence of heat treatment on the fracture toughness and crack propagation in 5% Cr martensitic steel. Procedia Engineering. 10, 631-637. 2011 [DOI]
[ACL9]
L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Processing, repairing and cyclic oxidation behaviour of sol-gel thermal barrier coatings. Surface and Coatings Technology. 206, 1609-1614. 2011 [DOI]
[ACL10]
J. Sniezewski, Y. Le Maoult and P. Lours. Oxidation and spallation of FeCrAl alloys and Thermal Barrier Coatings: in situ investigation under controlled temperature gradient . Materials at High Temperature. 27(2)101-108. 2010 [DOI]
[ACL11]
G. Bernhart, V. Velay and P. Lours. Heat Resistant Ni-Cr-Fe Steels for Superplastic Forming Dies : from material microstructure to die design. Key Engineering Materials. 433, 77-84. 2010 [DOI]
[ACL12]
J. Sniezewski, Y. Le Maoult, P. Lours, L. Pin, V. Minvie Bekale, D. Monceau, D. Oquab, J. Fenech, F. Ansart and J.-P. Bonino. Sol-gel thermal barrier coatings : optimization of the manufacturing route and durability under cyclic oxidation. Surface and Coatings Technology. 205, 1256-1261. 2010 [DOI]
[ACL13]
Y. Qi, P. Lours, Y. Le Maoult and Z.B. Zhang. Spallation Behavior of Thermally Grown Oxide Ceramic Film under Compressive Stresses. Rare Metal Material & Engineering. 38(2)1150-1153. 2009
[ACL14]
Y. Qi, P. Lours and Y. Le Maoult. Spallation process of thermally grown oxides by in situ CCD monitoring technique. Journal of Iron and Steel Research, International. 16(6)90-94. 2009
[ACL15]
T. Branza, F. Deschaux-beaume, V. Velay and P. Lours. A microstructural and low-cycle fatigue investigation of weld-repaired heat-resistant cast steels. Journal of Materials Processing Technology. 209(2)944-953. 2009 [DOI]
[ACL16]
J. Sniezewski, V. Vidal, P. Lours and Y. Le Maoult. Thermal Barrier Coatings adherence and spallation : interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient. Surface and Coatings Technology. 204, 807-811. 2009 [DOI]
[ACL17]
T. Branza, F. Deschaux-beaume and P. Lours. Study and prevention of cracking during weld-repair of heat-resistant cast steels. Journal of Materials Processing Technology. 209(1)944-953. 2009 [DOI]
[ACL18]
A. Duchosal, F. Deschaux-beaume, C. Bordreuil, G. Fras and P. Lours. Method for predicting risk of cracking during weld repair of heat resistant cast steels. Science and Technology of Welding and Joining. 13(2)126. 2008 [DOI]
[ACL19]
J. Sniezewski, Y. Le Maoult and P. Lours. In Situ Thermal Gradient Controlled Investigation of Spallation - Experimental Design and Preliminary Results. Materials Science Forum. 595-598, 1135-1143. 2008
[ACL20]
E. Herny, P. Lours, E. Andrieu, J.-M. Cloué and P. Lagain. Evolution of microstructure and impact-strength energy in thermally and thermomechanically aged 15-5 PH. Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications. 222, 209-304. 2008 [DOI]
[ACL21]
P. Lours, J. Sniezewski, Y. Le Maoult and B. Pieraggi. Direct observations and analysis of the spallation of alumina scales grown on PM2000 alloy. Materials Science and Engineering A. 480(1-2)40-48. 2008 [DOI]
[ACL22]
P. Lours, Y. Qi, Y. Le Maoult and B. Pieraggi. in situ and ex situ investigation of the spallation of thermally grown oxides. Materials Science Forum. 539-543, 1134. 2007
[ACL23]
C.Y. Gao, P. Lours and G. Bernhart. Thermomechanical stress analysis of superplastic forming tools. Journal of Materials Processing Technology. 169, 281-291. 2005 [DOI]
[ACL24]
T. Branza, A. Duchosal, G. Fras, F. Deschaux Beaume and P. Lours. Experimental and numerical investigation of the weld repair of superplastic forming dies. Journal of Materials Processing Technology. 155-156, 1673–1680. 2004 [DOI]
[ACL25]
P. Bruckel, P. Lamesle, P. Lours and B. Pieraggi. Isothermal Oxidation Behaviour of a Hot-Work Tool Steel. Materials Science Forum. 461-464, 831-838. 2004 [DOI]
[ACL26]
Y. Qi, P. Bruckel, P. Lours and Z. Zhang. investigation of adhesion and fracture of thermally grown oxide scales by interface indentation test. transactions of materials and heat treatment. 25(5)1233-1236. 2004
[ACL27]
P. Lours, Y. Le Maoult, D. Adé and B. Pieraggi. Direct Examinations of Oxide Scales Upon Cooling: a New Way to Analyse Oxide Scale Spallation. Materials Science Forum. 461-464, 639-646. 2004
[ACL28]
F. Delmas, P. Lours, M.-J. Casanove, A. Couret and A. Coujou. Quantitative TEM study of the precipitation microstructure in aluminium alloy Al(MgSiCu) 6056 T6. Materials Science and Engineering A. 373, 80-89. 2004 [DOI]
[ACL29]
C.Y. Gao, P. Lours and G. Bernhart. Damages induced by thermomechanical cycles in superplastic forming tools. Key Engineering Materials. 274-276, 93-98. 2004 [DOI]
[ACL30]
P. Lours, H.V. Bui, A. Nafi, O. Mercier and G. Bernhart. Rapid Tooling for Injection Moulding Process . Materials Science Forum. 449-452, 789-792. 2004 [DOI]
[ACL31]
G. Bernhart, F. Nazaret, A. Martinier, C.Y. Gao, D. Garriga Majo, T. Cutard and P. Lours. Design of SPF dies based on advanced material behaviour models. Materials Science Forum. 447-448, 123-130. 2004 [DOI]
[ACL32]
P. Bruckel, P. Lours, B. Pieraggi and P. Lamesle. in situ ESEM investigation of the oxide growth on hot work tool steel - effect of the water vapour. materials at high temperature. 20(4)551-560. 2003
[ACL33]
Y. Qi, P. Bruckel and P. Lours. Interfacial toughness of the nickel - nickel oxide system . journal of materials science letters. 22(5)371. 2003
[ACL34]
F. Delmas, M. Vivas, P. Lours, A. Couret and A. Coujou. Straining mechanisms in aluminium alloy 6056. In-situ investigation by transmission electron microscopy. Materials Science and Engineering A. 340, 286-291. 2003
[ACL35]
S. Baleix, G. Bernhart and P. Lours. Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies. Materials Science and Engineering A. 327, 155-166. 2002
[ACL36]
S. Baleix, S. Le Roux, G. Bernhart and P. Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. Journal of Materials Processing Technology. 118(1-3)321-328. 2001 [DOI]
[ACL37]
P. Lours, T. Cutard, G. Bernhart and C. Levaillant. Performances of metallic and ceramic tools for superplastic forming. International Journal of Materials and Product Technology. SPM1(2)445-452. 2001
[ACL38]
P. Lours, S. Le Roux and G. Bernhart. Oxidation behavior of creep resistant oxide-dispersion-strengthened alloy PM2000. Journal of Advanced Materials. 34(2)11-20. 2001
[ACL39]
P. Lours, S. Baleix and G. Bernhart. Investigation on the Damages of Superplastic Forming Tools. Journal of Materials Processing Technology. 117/3(G2). 2001
[ACL40]
S. Baleix, G. Bernhart and P. Lours. Investigation on the Spallation of Oxides Grown on Thermally Cycled Heat Resistant Cast Steels. materials science forum. 539, 369-372. 2001
[ACL41]
T. Cutard, E. Cailleux, P. Lours and G. Bernhart. structural and mechanical properties of refractory concrete for superplastic forming tools. Industrial Ceramics. 19(2)100. 1999
[ACL42]
P. Lours, J. Alexis and G. Bernhart. Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C. journal of materials science letters. 17, 1089. 1998
[ACL43]
M. Vivas, P. Lours, C. Levaillant, A. Couret, M.-J. Casanove and A. Coujou. Transmission electron microscopy study of precipitate morphology and precipitate overcoming processes in aluminium alloy 6056-T6. Materials Science and Engineering A. 664, 234-236. 1997
[ACL44]
M. Vivas, P. Lours, C. Levaillant, A. Couret, M.-J. Casanove and A. Coujou. Determination of precipitate strength in aluminium alloy 6056 from transmission electron microscopy data. Philosophical Magazine A. 76(5)921. 1997
[ACL45]
M. Vivas, P. Lours, C. Levaillant, A. Couret, M.-J. Casanove and A. Coujou. some aspects of preciptation hardening in aluminium alloy 6056-T6. materials science forum. 1305(217-222). 1996
[ACL46]
P. Lours, A. Coujou and P. Coulomb. on the deformation of <100> orientated gamma prime strengthening phase of the CMSX2 superalloy. acta metallurgica et materialia. 39(8)1787. 1991
[ACL47]
P. Lours, A. Coujou and B. De Mauduit. on the high temperature stress induced spreading of SISFs in gamma prime single crystals. Philosophical Magazine A. 62(2)921. 1990
[ACL48]
A. Coujou, P. Lours, N.A. Roy, D. Caillard and N. Clément. determination of the local tensile axis direction in a TEM in situ strained gamma prime single crystal - a finite element approach. acta metallurgica et materialia. 38(5)825. 1990
[ACL49]
N. Clément, D. Caillard, P. Lours and A. Coujou. TEM in situ straining of a Ni base gamma prime single crystal - unlocking of dissociated screw dislocations at low temperature. scipta metallurgica. 23, 563. 1989
[ACL50]
D. Caillard, N. Clément, A. Couret, P. Lours and A. Coujou. (111) glide in Ni3Al at room temperature. In situ observations under weak beam conditions. Philosophical Magazine Letters. 58(6)263. 1988
- Log in to post comments