Cutard Thierry

Professeur, Directeur de l'ICA-Albi, Directeur-adjoint de l'ICA
Téléphone : 
05 63 49 3161
Email : 
Site Perso : 
Domaine(s) d'enseignement : 
Mécanique générale
Génie mécanique et matériaux
Domaine(s) de recherche : 
Matériaux et procédés
Parcours professionnel : 

 

1988 :                Diplôme d’Ingénieur ENSCI,
Ecole Nationale Supérieure de Céramique Industrielle, Limoges.

1988 :                Diplôme d'Etudes Approfondies, Spécialité "Matériaux Céramiques et Traitements de Surface",
Laboratoire des Matériaux Céramiques et Traitements de Surface - Université de Limoges.

1993 :                Thèse en Science des Matériaux
intitulée "Caractérisation ultrasonore à haute température et sous contrainte de traction de composites céramique-céramique"
Laboratoire des Matériaux Céramiques et Traitements de Surface, Ecole Nationale Supérieure de Céramique Industrielle - Université de Limoges.

2005 :                Habilitation à Diriger des Recherche en Science des Matériaux,
intitulée "Matériaux inorganiques hétérogènes : architectures multi-échelles et comportements thermomécaniques"
Centre de Recherche Outillages, Matériaux et Procédés, Ecole des Mines d'Albi-Carmaux.

Sep. 1988 – Sep. 1989 : Scientifique du contingent, Commissariat à l'Energie Atomique - Centre d’Etudes du Ripault – Monts (France).

Oct. 1989 – Fév. 1993 :  Doctorant, Laboratoire des Matériaux Céramiques et Traitements de Surface Ecole Nationale Supérieure de Céramique Industrielle - Université de Limoges.

Nov. 1992 – Nov. 1993 : Attaché Temporaire d’Enseignement et de Recherche, Laboratoire des Matériaux Céramiques et Traitements de Surface Ecole Nationale Supérieure de Céramique Industrielle - Limoges.

Déc. 1993 – Oct. 1996 : Post Doctorant Laboratoire de Métallurgie Physique (LMP) – Département de Physique, Ecole Polytechnique Fédérale de Lausanne (Suisse).

Nov. 1996 à Jan. 2011 : Maître Assistant, Centre de Recherche Outillages, Matériaux et Procédés (CROMeP) devenu Institut Clément Ader Albi (ICAA) en 2009, Ecole des Mines d'Albi-Carmaux.

Jan. 2011 à ce jour: Professeur, Directeur de l'Institut Clément Ader Albi (ICAA), Directeur-Adjoint de  l'Institut Clément Ader, Ecole des Mines d'Albi-Carmaux

 

 

Publications : 

 

P1-Time delay and phase shift measurements for ultrasonic pulses using autocorrelation methods

T.Cutard, D.Fargeot, C.Gault, M.Huger

Journal of Applied Physics, vol.75, n°4, pp1909-1913, 1994.

P2- Ultrasonic measurement of Young’s modulus in dog-bone shaped samples subjected to a tensile stress

T.Cutard, D.Fargeot, C.Gault, M.Huger

Journal of Applied Physics, vol.76, n°1, pp126-132, 1994.

P3- High temperature ultrasonic characterization of the mechanical and microstructural behavior of a fibrous composite with a magnesium lithium aluminum silicate glass-ceramic matrix

T.Cutard, M.Huger, D.Fargeot, C.Gault

Journal of the American Ceramic Society, vol.79, n°4, pp957-961, 1996.

P4- Elasticity of Si-C-O and C fibres at high temperature

M.L. Bouchetou, T.Cutard, M.Huger, C.Gault

Scripta Materialia, vol.37, n°7, pp1005-1010, 1997.

P5- Microstructural evolutions and high temperature mechanical properties of TiC0.7N0.3-Mo2C-Ni cermets

T.Cutard, T.Viatte, G.Feusier, W.Benoit

Materials Science and Engineering A, vol.209, pp218-227, 1996.

P6- Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration

E. Carreno-Morelli, T.Cutard, R.Schaller, C.Bonjour

Materials Science and Engineering A, vol.251, pp48-57, 1998.

P7- High Temperature Properties of TiCN-Mo2C-Co Cermets Studied by Mechanical Spectroscopy
G.Feusier, T.Cutard, C.Verdon,, T.Viatte, W.Benoit

Journal de Physique 4, vol.6, n°8, pp751-756, 1999.

P8-  High Temperature Mechanical Properties of TiCN-Mo2C-Ni Cermets Studied by Internal Friction Measurements.
T.Viatte, T.Cutard, G.Feusier, W.Benoit

Journal de Physique 4, vol.6, n°8, pp743-746, 1999.

P9- Investigation into the potential of a composite combining toughness and plastic deformation resistance
T.Viatte, S.Bolognini, T.Cutard, G.Feusier, D.Mari, W.Benoit

International Journal of Refractory Metals and Hard Materials, vol.17, n°1-3, pp79-89, 1999.

P10- Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results

F.Deschaux-Beaume, F.Schmidt, N.Fréty, T.Cutard, J.C.Boyer, C.Levaillant

Journal of Materials and Processing Technology, vol.92, n°93, pp502-507, 1999.

P11- Structural and mechanical properties of a refractory concrete for superplastic forming tools
E. Cailleux, P.Lours, T.Cutard, G.Bernhart

Industrial Ceramics, vol.19, n°2, pp100-102, 1999.

P12- A phenomenological model for high temperature oxidation of Si3N4-TiN composites

F.Deschaux-Beaume, N.Fréty, T.Cutard, C.Colin,

Materials Science Forum, vol.372, n°1, pp403-410, 2001.

P13- Performance of metallic and ceramic tools for superplastic forming

P.Lours, T.Cutard, G.Bernhart, C.Levaillant

International Journal of Material Products and Technology, SPM1, 2, 445, 2001

P14- Oxidation of a Silicon Nitride-Titanium Nitride Composite : Microstructural Investigations and Phenomenological Modeling

F.Deschaux-Beaume, T.Cutard, N.Fréty, C.Levaillant

Journal of the American Ceramic Society, vol.85, n°7, pp1860-1866, 2002.

P15- Pullout of metallic fibres from a ceramic refractory matrix

T.Cutard, E.Cailleux, G.Bernhart

Composites: Part A, A33, pp1461-1466, 2002.

P16- The role of Mo in the hard-phase grains of (Ti,Mo)(C,N)-Co cermets

E.Conforto, T.Cutard, D.Mari

Philosophical  Magazine, vol.11,  n°6, pp1717-1733, 2004.

P17- TiMoCN based cermets – Part1. Morphology and phase composition.

D.Mari, S.Bolognini, G.Feusier, T.Cutard, C.Verdon, T.Viatte, W.Benoit

International Journal of Refractory Metals & Hardmetals, vol.21, pp37-46, 2003.

P18- TiMoCN based cermets – Part2. Microstructure and room temperature mechanical properties.

D.Mari, S.Bolognini, G.Feusier, T.Cutard, C.Verdon, T.Viatte, W.Benoit

International Journal of Refractory Metals & Hardmetals, vol.21, pp47-53, 2003.

P19- Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM

H.Marzagui, T.Cutard,

Journal of Materials and Processing Technology, vol.155-156, pp1474-1481, 2004.

P20- Pullout of steel fibres from a refractory castable: experiment and modeling

E.Cailleux, T.Cutard, G.Bernhart

Mechanics of Materials, vol.37, n°4, pp427-445, 2005

P21- Study of a ceramic refractory reinforced with metallic fibres : from the microstructure to the mechanical behaviour

E.Cailleux, T.Cutard, G.Bernhart

Industrial Ceramics, vol.25, n°1, pp21-26, 2005.

P22- Influence of the mechanical behaviour specificities of damaged refractory castables on the Young's modulus determination

F.Nazaret, H.Marzagui, T.Cutard,

Journal of the European Ceramic Society, vol.26, n° 8, p.1429-1438, 2006.

P23- F. Deschaux-Beaume, N. Fréty, T. Cutard and C. Colin

“Oxidation modelling of a Si3N4–TiN ceramic: Microstructure and kinetic laws”

Ceramics International, Volume 33, Issue 7, September 2007, pp 1331-1339

 

P24-  J.J.Orteu, T.Cutard, D.Garcia, E.Cailleux, L.Robert

« Application of stereovision to the mechanical characterisation of ceramic refractories reinforced with metallic fibres »

Strain, Volume 43, Number2, May 2007, pp 96-108

 

P25-  L.Robert, F.Nazaret, T.Cutard, J.J.Orteu,

« Use of Digital Image Stereo-Correlation (DISC) to characterize the mechanical behavior of refractory castable »

Experimental Mechanics, 47(6), December 2007, pp 761-773.

 

P26-  G.Bernhart, F.Nazaret, T.Cutard,

« Fibre reinforced refractory castables: an alternative solution for SPF die manufacturing»

Materials Science Forum Vols. 551-552, 2007, pp 37-42.

 

P27- M. Tata, D. Miroud, S. Lebaili, T.Cutard,

The study of properties of WC-based and W-based composites fabricated by infiltration with liquid Cu-Mn binder,

Asian Journal of Scientific Research 2 (2); pp 76-86, 2009.

 

P28-  G.Bernhart, F.Nazaret, T.Cutard,

« Fibre reinforced refractory castables for SPF toolings»

MaterialWissenschaft und Werkstofftechnick, Vol. 39, n°4-5, pp 317-321, 2008.

 

P29- Oxidation Modeling of a Si3N4-TiN Composite: Comparison Between Experiment and Kinetic Models

F. Deschaux-Beaume, N. Fréty, T. Cutard

Revue Ceramics International, Vol. 35, n°5, pp 1709-1718, 2009.

 

P30- Wear mechanisms of WC-Co cutting tools from high-speed tribological tests

T. Kagnaya, C. Boher, L. Lambert, M. Lazard, T. Cutard,

Revue Wear, Vol. 267, n°5-8, pp 890-897, 2009.

 

P31- Wear mechanisms of WC-Co cutting tools from turning experiments and high-speed tribological tests

T. Kagnaya, C. Boher, L. Lambert, M. Lazard, T. Cutard,

The International Journal of Multiphysics, Vol. 3, n°2, pp 141-153, 2009.

 

P32- Thermomechanical characterization of monolithic refractory castables
T.Cutard, N.Donval, A.Mazzoni, C.Michel, F.Nazaret

Advances in Science and Technology, vol.70, p.37-46 , 2010

 

P33- Sizing of refractory castable gas-burner using thermomechanical simulations

F.Nazaret, T.Cutard, O.Barrau,

Advances in Science and Technology, vol.70, p.173-178 , 2010

 

P34- A new method to determine the Young's modulus of refractory materials

E.Bilbao, E.Blond, C.Michel, T.Cutard, N.Schmitt, J.Poirier

Interceram, vol.59 , n°1 , p.34-38 , 2010

 

P35- Temperature evolution in a WC-6%Co cutting tool during turning machining: experiment and finite element simulations.

T. Kagnaya, M. Lazard, L. Lambert, C. Boher and T. Cutard.

WSEAS TRANSACTIONS on HEAT and MASS TRANSFER. 6(3)71-80. 2011

 

P36- Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming

A. Mazzoni, G. Bernhart and T. Cutard.

Mat-wiss und Werkstofftech. 43(9)758-762. 2012

 

P37- A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation.

B. Haddag, T. Kagnaya, M. Nouari and T. Cutard.

Heat Mass Transfer. , . 2012 [publié, en ligne]

 

P38- Applicability of image correlation techniques to characterize asymmetric refractory creep during bending tests.

G. Dusserre, F. Nazaret, L. Robert and T. Cutard.

Journal of the European Ceramic Society. 33(2)221–231. 2013