Thierry Sentenac

thierry_sentenac_c_13.jpg
Fonction : 
Directeur centre ICA-Albi (UMR CNRS 5312)

Parcours

1988 : Diplôme d’Ingénieur ENSCI,
Ecole Nationale Supérieure de Céramique Industrielle, Limoges.
1988 : Diplôme d'Etudes Approfondies, Spécialité "Matériaux Céramiques et Traitements de Surface",
Laboratoire des Matériaux Céramiques et Traitements de Surface - Université de Limoges.
1993 : Thèse en Science des Matériaux
intitulée "Caractérisation ultrasonore à haute température et sous contrainte de traction de composites céramique-céramique"
Laboratoire des Matériaux Céramiques et Traitements de Surface, Ecole Nationale Supérieure de Céramique Industrielle - Université de Limoges.
2005 : Habilitation à Diriger des Recherche en Science des Matériaux,
intitulée "Matériaux inorganiques hétérogènes : architectures multi-échelles et comportements thermomécaniques"
Centre de Recherche Outillages, Matériaux et Procédés, Ecole des Mines d'Albi-Carmaux.
Sep. 1988 – Sep. 1989 : Scientifique du contingent, Commissariat à l'Energie Atomique - Centre d’Etudes du Ripault – Monts (France).
Oct. 1989 – Fév. 1993 :  Doctorant, Laboratoire des Matériaux Céramiques et Traitements de Surface Ecole Nationale Supérieure de Céramique Industrielle - Université de Limoges.
Nov. 1992 – Nov. 1993 : Attaché Temporaire d’Enseignement et de Recherche, Laboratoire des Matériaux Céramiques et Traitements de Surface Ecole Nationale Supérieure de Céramique Industrielle - Limoges.
Déc. 1993 – Oct. 1996 : Post Doctorant Laboratoire de Métallurgie Physique (LMP) – Département de Physique, Ecole Polytechnique Fédérale de Lausanne (Suisse).
Nov. 1996 à Jan. 2011 : Maître Assistant, Centre de Recherche Outillages, Matériaux et Procédés (CROMeP) devenu Institut Clément Ader Albi (ICAA) en 2009, Ecole des Mines d'Albi-Carmaux.
Jan. 2011 à ce jour: Professeur, Directeur de l'Institut Clément Ader Albi (ICAA), Directeur-Adjoint de  l'Institut Clément Ader, Ecole des Mines d'Albi-Carmaux

Publications principales

P1-Time delay and phase shift measurements for ultrasonic pulses using autocorrelation methods
T.Cutard, D.Fargeot, C.Gault, M.Huger
Journal of Applied Physics, vol.75, n°4, pp1909-1913, 1994.
P2- Ultrasonic measurement of Young’s modulus in dog-bone shaped samples subjected to a tensile stress
T.Cutard, D.Fargeot, C.Gault, M.Huger
Journal of Applied Physics, vol.76, n°1, pp126-132, 1994.
P3- High temperature ultrasonic characterization of the mechanical and microstructural behavior of a fibrous composite with a magnesium lithium aluminum silicate glass-ceramic matrix
T.Cutard, M.Huger, D.Fargeot, C.Gault
Journal of the American Ceramic Society, vol.79, n°4, pp957-961, 1996.
P4- Elasticity of Si-C-O and C fibres at high temperature
M.L. Bouchetou, T.Cutard, M.Huger, C.Gault
Scripta Materialia, vol.37, n°7, pp1005-1010, 1997.
P5- Microstructural evolutions and high temperature mechanical properties of TiC0.7N0.3-Mo2C-Ni cermets
T.Cutard, T.Viatte, G.Feusier, W.Benoit
Materials Science and Engineering A, vol.209, pp218-227, 1996.
P6- Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
E. Carreno-Morelli, T.Cutard, R.Schaller, C.Bonjour
Materials Science and Engineering A, vol.251, pp48-57, 1998.
P7- High Temperature Properties of TiCN-Mo2C-Co Cermets Studied by Mechanical Spectroscopy
G.Feusier, T.Cutard, C.Verdon,, T.Viatte, W.Benoit
Journal de Physique 4, vol.6, n°8, pp751-756, 1999.
P8-  High Temperature Mechanical Properties of TiCN-Mo2C-Ni Cermets Studied by Internal Friction Measurements.
T.Viatte, T.Cutard, G.Feusier, W.Benoit
Journal de Physique 4, vol.6, n°8, pp743-746, 1999.
P9- Investigation into the potential of a composite combining toughness and plastic deformation resistance
T.Viatte, S.Bolognini, T.Cutard, G.Feusier, D.Mari, W.Benoit
International Journal of Refractory Metals and Hard Materials, vol.17, n°1-3, pp79-89, 1999.
P10- Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results
F.Deschaux-Beaume, F.Schmidt, N.Fréty, T.Cutard, J.C.Boyer, C.Levaillant
Journal of Materials and Processing Technology, vol.92, n°93, pp502-507, 1999.
P11- Structural and mechanical properties of a refractory concrete for superplastic forming tools
E. Cailleux, P.Lours, T.Cutard, G.Bernhart
Industrial Ceramics, vol.19, n°2, pp100-102, 1999.
P12- A phenomenological model for high temperature oxidation of Si3N4-TiN composites
F.Deschaux-Beaume, N.Fréty, T.Cutard, C.Colin,
Materials Science Forum, vol.372, n°1, pp403-410, 2001.
P13- Performance of metallic and ceramic tools for superplastic forming
P.Lours, T.Cutard, G.Bernhart, C.Levaillant
International Journal of Material Products and Technology, SPM1, 2, 445, 2001
P14- Oxidation of a Silicon Nitride-Titanium Nitride Composite : Microstructural Investigations and Phenomenological Modeling
F.Deschaux-Beaume, T.Cutard, N.Fréty, C.Levaillant
Journal of the American Ceramic Society, vol.85, n°7, pp1860-1866, 2002.
P15- Pullout of metallic fibres from a ceramic refractory matrix
T.Cutard, E.Cailleux, G.Bernhart
Composites: Part A, A33, pp1461-1466, 2002.
P16- The role of Mo in the hard-phase grains of (Ti,Mo)(C,N)-Co cermets
E.Conforto, T.Cutard, D.Mari
Philosophical  Magazine, vol.11,  n°6, pp1717-1733, 2004.
P17- TiMoCN based cermets – Part1. Morphology and phase composition.
D.Mari, S.Bolognini, G.Feusier, T.Cutard, C.Verdon, T.Viatte, W.Benoit
International Journal of Refractory Metals & Hardmetals, vol.21, pp37-46, 2003.
P18- TiMoCN based cermets – Part2. Microstructure and room temperature mechanical properties.
D.Mari, S.Bolognini, G.Feusier, T.Cutard, C.Verdon, T.Viatte, W.Benoit
International Journal of Refractory Metals & Hardmetals, vol.21, pp47-53, 2003.
P19- Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM
H.Marzagui, T.Cutard,
Journal of Materials and Processing Technology, vol.155-156, pp1474-1481, 2004.
P20- Pullout of steel fibres from a refractory castable: experiment and modeling
E.Cailleux, T.Cutard, G.Bernhart
Mechanics of Materials, vol.37, n°4, pp427-445, 2005
P21- Study of a ceramic refractory reinforced with metallic fibres : from the microstructure to the mechanical behaviour
E.Cailleux, T.Cutard, G.Bernhart
Industrial Ceramics, vol.25, n°1, pp21-26, 2005.
P22- Influence of the mechanical behaviour specificities of damaged refractory castables on the Young's modulus determination
F.Nazaret, H.Marzagui, T.Cutard,
Journal of the European Ceramic Society, vol.26, n° 8, p.1429-1438, 2006.
P23- F. Deschaux-Beaume, N. Fréty, T. Cutard and C. Colin
“Oxidation modelling of a Si3N4–TiN ceramic: Microstructure and kinetic laws”
Ceramics International, Volume 33, Issue 7, September 2007, pp 1331-1339
P24-  J.J.Orteu, T.Cutard, D.Garcia, E.Cailleux, L.Robert
« Application of stereovision to the mechanical characterisation of ceramic refractories reinforced with metallic fibres »
Strain, Volume 43, Number2, May 2007, pp 96-108
P25-  L.Robert, F.Nazaret, T.Cutard, J.J.Orteu,
« Use of Digital Image Stereo-Correlation (DISC) to characterize the mechanical behavior of refractory castable »
Experimental Mechanics, 47(6), December 2007, pp 761-773.
P26-  G.Bernhart, F.Nazaret, T.Cutard,
« Fibre reinforced refractory castables: an alternative solution for SPF die manufacturing»
Materials Science Forum Vols. 551-552, 2007, pp 37-42.
P27- M. Tata, D. Miroud, S. Lebaili, T.Cutard,
The study of properties of WC-based and W-based composites fabricated by infiltration with liquid Cu-Mn binder,
Asian Journal of Scientific Research 2 (2); pp 76-86, 2009.
P28-  G.Bernhart, F.Nazaret, T.Cutard,
« Fibre reinforced refractory castables for SPF toolings»
MaterialWissenschaft und Werkstofftechnick, Vol. 39, n°4-5, pp 317-321, 2008.
P29- Oxidation Modeling of a Si3N4-TiN Composite: Comparison Between Experiment and Kinetic Models
F. Deschaux-Beaume, N. Fréty, T. Cutard
Revue Ceramics International, Vol. 35, n°5, pp 1709-1718, 2009.
P30- Wear mechanisms of WC-Co cutting tools from high-speed tribological tests
T. Kagnaya, C. Boher, L. Lambert, M. Lazard, T. Cutard,
Revue Wear, Vol. 267, n°5-8, pp 890-897, 2009.
P31- Wear mechanisms of WC-Co cutting tools from turning experiments and high-speed tribological tests
T. Kagnaya, C. Boher, L. Lambert, M. Lazard, T. Cutard,
The International Journal of Multiphysics, Vol. 3, n°2, pp 141-153, 2009.
P32- Thermomechanical characterization of monolithic refractory castables
T.Cutard, N.Donval, A.Mazzoni, C.Michel, F.Nazaret
Advances in Science and Technology, vol.70, p.37-46 , 2010
P33- Sizing of refractory castable gas-burner using thermomechanical simulations
F.Nazaret, T.Cutard, O.Barrau,
Advances in Science and Technology, vol.70, p.173-178 , 2010
P34- A new method to determine the Young's modulus of refractory materials
E.Bilbao, E.Blond, C.Michel, T.Cutard, N.Schmitt, J.Poirier
Interceram, vol.59 , n°1 , p.34-38 , 2010
P35- Temperature evolution in a WC-6%Co cutting tool during turning machining: experiment and finite element simulations.
T. Kagnaya, M. Lazard, L. Lambert, C. Boher and T. Cutard.
WSEAS TRANSACTIONS on HEAT and MASS TRANSFER. 6(3)71-80. 2011
P36- Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming
A. Mazzoni, G. Bernhart and T. Cutard.
Mat-wiss und Werkstofftech. 43(9)758-762. 2012
P37- A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation.
B. Haddag, T. Kagnaya, M. Nouari and T. Cutard.
Heat Mass Transfer. , . 2012 [publié, en ligne]
P38- Applicability of image correlation techniques to characterize asymmetric refractory creep during bending tests.
G. Dusserre, F. Nazaret, L. Robert and T. Cutard.
Journal of the European Ceramic Society. 33(2)221–231. 2013